We could not possibly deliver on our promises if not for the right tools in the right hands. With Computer Numeric Controlled (CNC) lathes and mills as well as manual lathes and mills (used when required), our manufacturing process is fully equipped and ready for almost any job you need done. Our fleet on machinery also includes wire cutters – used when and where required by our highly dedicated and fully competent team. Peruse our gear and take in the specifications, see if what you have in mind will fit our equipment – if you need advice then please do not hesitate to contact us.
Engineering Machinery
SUNWOOD ENGINEERING MACHINERY
- Incline direct drive spindle
- High speed tool changer
- 12000 rpm limit
- Through spindle coolant
- Spindle measuring probe / Table mounted
- tool touch sensor
- “x” travel-1270 / “y” travel 500
- Rotary axis
- (Super Quick Turn Mill Turn)
- Mazatrol 640t pc fusion controller
- 150 mm chuck and 150 mm collet chuck
- 550 mm diameter swing
- 221 mm turn diameter
- 400 mm turn length
- 12 station turret with 12 live tools
- 50.8 mm bar capacity
- Also with Quicker 65 bar feeder, maximum bar length up to 1200 mm
- Mazatrol T32B Conversational Control
- 204 mm Chuck
- 440 mm Swing
- 300 mm Turn Diameter
- 450 mm Turn Length
- 8 Station Turret
- 51 mm Bar Capacity
- Also with Quicker 65 bar feeder, maximum Bar length up to 1200 mm.
- Main spindle 60 mm collet chuck
- Sub-spindle 32 mm collet chuck
- 12 station turret
- Overall length of part 150 mm
- Also interchangeable 100 mm 3 jaw chuck
- Also with Quicker 65 bar feeder, maximum bar length up to 1200 mm
- Main spindle 42mm collet chucks up to 42mm
- Sub spindle collet chuck up to 32 mm diameter
- 8 station turret, turned length of part 130mm
- Also with Quicker 65 bar feeder, maximum Bar length up to 1200 mm
- Main spindle 42mm collet chucks up to 42mm
- 5 Tool vertical station
- 4 Tool vertical tail stock
- Centre Lathe’s with 2 Axis digital
- Up to 530 swing x 2000 between centres
- 2.5 m Bed
- 406 mm Diameter 4 Jaw Chuck with slotting head
- 1300 mm Diameter in Gap
- 850 mm Diameter over Bed
- Turret Style Pacific Mill – 2 axis digital
- Table size “x” -750.0 mm, “y” – 375.0 mm
- Fexac Universal type 11HP
- Table size: “x” – 1200 mm, “y” – 300 mm
- 4 Axis
- “x” – 750 mm
- “y” – 400 mm
- “z” – 400 mm
- 3 Axis
- “x” – 750 mm
- “y” – 400 mm
- “z’ – 400 mm
- 2 Axis
- 600 mm swing
- 500 BC
- 72 mm Spindle Bore
- 10 inch chuck
- 8 Station Turret
- 5 Axis
- “x” – 325 mm
- “y” – 200 mm
- “z” – 200 mm
- 5 Axis
- “x” – 530 mm
- “y” – 300 mm
- “z” – 200 mm